TRONDHEIM, June18, 2004
Ström, G.: "Contact angles and surface energy"
Kleen, M: "Chemical characterization of paper surfaces by ESCA and TOF-SIMS"
Preston, J.S.: "Ink component distribution in paper studied by SIMS and XPS"
Chinga, G: "Comparison of optical devices to assess paper surface structure"
Ramaswamy, S.: "Characterization of 3D structure of porous materials and their application in product design and development" Part 1, Part 2
Muck, T. and Rutar, V.: "The influence of paper quality on distribution of ink-jet inks"
HELSINKI, September 30, 2004
Peltonen, J.: "Characterization of surfaces by AFM"
Veenstra, P.: "Damages areas in paper, during sheet finishing operations"
Kenttä, E.: "Determination of SB-latex distribution on paper coating surfaces with ATR-FTIR spectroscopy"
Lozo, B.: Surface characteristics of handsheets made from digital printed deinked pulp"
Vyörykkä, J.: "Confocal Raman microscopy in the analysis of coated and printed papers"
Ciolacu, F. and Bobu, E.: Paper interaction with fountain solution during multi-color offset printing"
CORNWALL, April 14-15, 2005
Ström, G.: "Dye retention and print quality in inkjet printing"
Rutar, V.: "The effect of electrical properties on printing quality and runnability"
MADRID, October 6-7, 2005
Chinga, G.: Surface structure characterization for mottling assessment on coated papers"
Gregersen, Ø., Eriksen, Ø. and Chinga, G. "Ink distribution and surface roughening in cold- and heatset printed surfaces"
Bobu, E. and Coilacu, F.: "The effect of formation on paper properties with respect to different aggregation mechanisms"
BUDAPEST, May 4-5, 2006
Pöhler, T., Juvonen, K. and Sneck, A.: "Coating layer microstructure and location of binder - results from SEM analysis"
Johansson, P-Å and Gil Barros, G.: "Flexo printability and surface topography" Part 1, Part 2
Moutinho, I.: "Characterization of Surface Sized E. Globulus Fine Papers"
Lozo, B.: "SEM analysis of ink jet prints"
LJUBLJANA, September 21-22, 2006
Veenstra, P: “How can fibre bundles that stick out of the board cut face be explained”
Veenstra, P: "Compression phenomena in the z-direction of board or paper"
Hladnik, A.: “Image analysis based methods for characterization of paper structure and print”
Kataja, K.: “Tailoring paper printability with small amount of polymers or with plasma treatment”
Muck, T., Zveglic, M. and Grilj, S.: “Limits and advantages of digital printing techniques”
Strøm, G.: "Absorption uniformity measurements using micro sized drops"
Barth, M. and Zelm, R.: "Melting, penetrating and of laser printing toner on fine papers"
Ravnsborg, S.: "Characterization of paper surface for improved printing paper grades"
Boppel, J.: "Gravure technology and gravure process"
GRENOBLE, October 4-5, 2007
Herbst, T..: "Does "Downgrading" of paper (change from coated onto uncoated) pay out"
Ridgway, C.: "Determining bulk density and coating porosity for coated paper samples"
Schmidt, W.A.: "Technologies and paper properties for printing photos in the digital age"
PFI AS | Phone: +47 73 60 50 65 | Fax: +47 73 55 09 99 | firmapost@pfi.no | Høgskoleringen 6b, NO-7491 Trondheim, Norway